How to Write a Quantizer for PyTorch 2.0 Export Quantization

Author: Leslie Fang, Weiwen Xia, Jiong Gong, Kimish Patel, Jerry Zhang

Note

Quantization in PyTorch 2.0 export is still a work in progress.

Prerequisites:

Required:

• Torchdynamo concepts in PyTorch

• Quantization concepts in PyTorch

• (prototype) PyTorch 2.0 Export Post Training Static Quantization

Optional:

• FX Graph Mode post training static quantization

• BackendConfig in PyTorch Quantization FX Graph Mode

• QConfig and QConfigMapping in PyTorch Quantization FX Graph Mode

Introduction

(prototype) PyTorch 2.0 Export Post Training Static Quantization introduced the overall API for pytorch 2.0 export quantization, main difference from fx graph mode quantization in terms of API is that we made it explicit that quantiation is targeting a specific backend. So to use the new flow, backend need to implement a Quantizer class that encodes: (1). What is supported quantized operator or patterns in the backend (2). How can users express the way they want their floating point model to be quantized, for example, quantized the whole model to be int8 symmetric quantization, or quantize only linear layers etc.

Please see here For motivations for the new API and Quantizer.

An existing quantizer object defined for XNNPACK is in QNNPackQuantizer

Annotation API

Quantizer uses annotation API to convey quantization intent for different operators/patterns. Annotation API mainly consists of QuantizationSpec and QuantizationAnnotation.

QuantizationSpec is used to convey intent of how a tensor will be quantized, e.g. dtype, bitwidth, min, max values, symmetric vs. asymmetric etc. Furthermore, QuantizationSpec also allows quantizer to specify how a tensor value should be observed, e.g. MinMaxObserver, or HistogramObserver , or some customized observer.

QuantizationAnnotation composed of QuantizationSpec objects is used to annotate input tensors and output tensor of a pattern. Annotating input tensors is equivalent of annotating input edges, while annotating output tensor is equivalent of annotating node. QuantizationAnnotation is a dataclass with several fields:

• input_qspec_map field is of class Dict to map each input tensor (as input edge) to a QuantizationSpec.

• output_qspec field expresses the QuantizationSpec used to annotate the output tensor;

• _annotated field indicates if this node has already been annotated by quantizer.

To conclude, annotation API requires quantizer to annotate edges (input tensors) or nodes (output tensor) of the graph. Now, we will have a step-by-step tutorial for how to use the annotation API with different types of QuantizationSpec.

1. Annotate Common Operator Patterns

In order to use the quantized pattern/operators, e.g. quantized add, backend developers will have intent to quantize (as expressed by QuantizationSpec) inputs, output of the pattern. Following is an example flow (take add operator as example) of how this intent is conveyed in the quantization workflow with annotation API.

• Step 1: Identify the original floating point pattern in the FX graph. There are several ways to identify this pattern: Quantizer may use a pattern matcher to match the operator pattern; Quantizer may go through the nodes from start to the end and compare the node’s target type to match the operator pattern. In this example, we can use the get_source_partitions to match this pattern. The original floating point add pattern only contain a single add node.

add_partitions = get_source_partitions(gm.graph, [operator.add, torch.add])
add_partitions = list(itertools.chain(*add_partitions.values()))
for add_partition in add_partitions:
    add_node = add_partition.output_nodes[0]

• Step 2: Define the QuantizationSpec for inputs and output of the pattern. QuantizationSpec defines the data type, qscheme, and other quantization parameters about users’ intent of how to observe or fake quantize a tensor.

act_quantization_spec = QuantizationSpec(
    dtype=torch.int8,
    quant_min=-128,
    quant_max=127,
    qscheme=torch.per_tensor_affine,
    is_dynamic=False,
    observer_or_fake_quant_ctr=HistogramObserver.with_args(eps=2**-12),
)

input_act_qspec = act_quantization_spec
output_act_qspec = act_quantization_spec

• Step 3: Annotate the inputs and output of the pattern with QuantizationAnnotation. In this example, we will create the QuantizationAnnotation object with the QuantizationSpec created in above step 2 for two inputs and one output of the add node.

input_qspec_map = {}
input_act0 = add_node.args[0]
input_qspec_map[input_act0] = input_act_qspec

input_act1 = add_node.args[1]
input_qspec_map[input_act1] = input_act_qspec

add_node.meta["quantization_annotation"] = QuantizationAnnotation(
    input_qspec_map=input_qspec_map,
    output_qspec=output_act_qspec,
    _annotated=True,
)

After we annotate the add node like this, in the following up quantization flow, HistogramObserver will be inserted at its two input nodes and one output node in prepare phase. And HistogramObserver will be substituted with quantize node and dequantize node in the convert phase.

2. Annotate Operators that Shares Quantization Params

It is natural that users want to annotate a quantized model where quantization parameters can be shared among some tensors explicitly. Two typical use cases are:

• Example 1: One example is for add where having both inputs sharing quantization parameters makes operator implementation much easier. Without using of SharedQuantizationSpec, we must annotate add as example in above section 1, in which two inputs of add has different quantization parameters.

• Example 2: Another example is that of sharing quantization parameters between inputs and output. This typically results from operators such as maxpool, average_pool, concat etc.

SharedQuantizationSpec is designed for this use case to annotate tensors whose quantization parameters are shared with other tensors. Input of SharedQuantizationSpec is an EdgeOrNode object which can be an input edge or an output value.

Note

• Sharing is transitive

  Some tensors might be effectively using shared quantization spec due to:

  • Two nodes/edges are configured to use SharedQuantizationSpec.

  • There is existing sharing of some nodes.

  For example, let’s say we have two conv nodes conv1 and conv2, and both of them are fed into a cat node: cat([conv1_out, conv2_out], ...). Let’s say the output of conv1, conv2, and the first input of cat are configured with the same configurations of QuantizationSpec. The second input of cat is configured to use SharedQuantizationSpec with the first input.

  conv1_out: qspec1(dtype=torch.int8, ...)
  conv2_out: qspec1(dtype=torch.int8, ...)
  cat_input0: qspec1(dtype=torch.int8, ...)
  cat_input1: SharedQuantizationSpec((conv1, cat))  # conv1 node is the first input of cat
  

  First of all, the output of conv1 is implicitly sharing quantization parameters (and observer object) with the first input of cat, and the same is true for the output of conv2 and the second input of cat. Therefore, since the user configures the two inputs of cat to share quantization parameters, by transitivity, conv2_out and conv1_out will also be sharing quantization parameters. In the observed graph, you will see the following:

  conv1 -> obs -> cat
  conv2 -> obs   /
  

  and both obs will be the same observer instance.

• Input edge is the connection between input node and the node consuming the input, so it’s a Tuple[Node, Node].

• Output value is an FX Node.

Now, if we want to rewrite add annotation example with SharedQuantizationSpec to indicate two input tensors as sharing quantization parameters. We can define its QuantizationAnnotation as this:

• Step 1: Identify the original floating point pattern in the FX graph. We can use the same methods introduced in QuantizationSpec example to identify the add pattern.

• Step 2: Annotate input_act0 of add with QuantizationSpec.

• Step 3: Create a SharedQuantizationSpec object with input edge defined as (input_act0, add_node) which means to share the observer used for this edge. Then, user can annotate input_act1 with this SharedQuantizationSpec object.

input_qspec_map = {}
share_qparams_with_input_act0_qspec = SharedQuantizationSpec((input_act0, add_node))
input_qspec_map = {input_act0: act_quantization_spec, input_act1: share_qparams_with_input_act0_qspec}

add_node.meta["quantization_annotation"] = QuantizationAnnotation(
    input_qspec_map=input_qspec_map,
    output_qspec=act_quantization_spec,
    _annotated=True,
)

3. Annotate Operators with Fixed Quantization Parameters

Another typical use case to annotate a quantized model is for tensors whose quantization parameters are known beforehand. For example, operator like sigmoid, which has predefined and fixed scale/zero_point at input and output tensors. FixedQParamsQuantizationSpec is designed for this use case. To use FixedQParamsQuantizationSpec, users need to pass in parameters of scale and zero_point explicitly.

• Step 1: Identify the original floating point pattern in the FX graph. We can use the same methods introduced in QuantizationSpec example to identify the sigmoid pattern.

• Step 2: Create FixedQParamsQuantizationSpec object with inputs of fixed scale, zero_point value. These values will be used to create the quantize node and dequantize node in the convert phase.

• Step 3: Annotate inputs and output to use this FixedQParamsQuantizationSpec object.

act_qspec = FixedQParamsQuantizationSpec(
    dtype=torch.uint8,
    quant_min=0,
    quant_max=255,
    qscheme=torch.per_tensor_affine,
    scale=1.0 / 256.0,
    zero_point=0,
)
sigmoid_node.meta["quantization_annotation"] = QuantizationAnnotation(
    input_qspec_map={input_act: act_qspec},
    output_qspec=act_qspec,
    _annotated=True,
)

4. Annotate Tensors with Derived Quantization Parameters

Another use case is to define the constraint for tensors whose quantization parameters are derived from other tensors. For example, if we want to annotate a convolution node, and define the scale of its bias input tensor as product of the activation tensor’s scale and weight tensor’s scale. We can use DerivedQuantizationSpec to annotate this conv node.

• Step 1: Identify the original floating point pattern in the FX graph. We can use the same methods introduced in QuantizationSpec example to identify the convolution pattern.

• Step 2: Define derive_qparams_fn function, it accepts list of ObserverOrFakeQuantize ( ObserverBase or FakeQuantizeBase) as input. From each ObserverOrFakeQuantize object, user can get the scale, zero point value. User can define its heuristic about how to derive new scale, zero point value based on the quantization parameters calculated from the observer or fake quant instances.

• Step 3: Define DerivedQuantizationSpec obejct, it accepts inputs of: list of EdgeOrNode objects. The observer corresponding to each EdgeOrNode object will be passed into the derive_qparams_fn function; derive_qparams_fn function; several other quantization parameters such as dtype, qscheme.

• Step 4: Annotate the inputs and output of this conv node with QuantizationAnnotation.

def derive_qparams_fn(obs_or_fqs: List[ObserverOrFakeQuantize]) -> Tuple[Tensor, Tensor]:
    assert len(obs_or_fqs) == 2, \
        "Expecting two obs/fqs, one for activation and one for weight, got: {}".format(len(obs_or_fq))
    act_obs_or_fq = obs_or_fqs[0]
    weight_obs_or_fq = obs_or_fqs[1]
    act_scale, act_zp = act_obs_or_fq.calculate_qparams()
    weight_scale, weight_zp = weight_obs_or_fq.calculate_qparams()
    return torch.tensor([act_scale * weight_scale]).to(torch.float32), torch.tensor([0]).to(torch.int32)

bias_qspec = DerivedQuantizationSpec(
    derived_from=[(input_act, node), (weight, node)],
    derive_qparams_fn=derive_qparams_fn,
    dtype=torch.int32,
    quant_min=-2**31,
    quant_max=2**31 - 1,
    qscheme=torch.per_tensor_symmetric,
)
input_qspec_map = {input_act: act_quantization_spec, weight: weight_quantization_spec, bias: bias_qspec}
node.meta["quantization_annotation"] = QuantizationAnnotation(
    input_qspec_map=input_qspec_map,
    output_qspec=act_quantization_spec,
    _annotated=True,
)

5. A Toy Example with Resnet18

After above annotation methods defined with QuantizationAnnotation API, we can now put them together to construct a BackendQuantizer and run a toy example with Torchvision Resnet18. To better understand the final example, here are the classes and utility functions that are used in the example:

• QuantizationConfig consists of QuantizationSpec for activation, weight, and bias separately.

• When annotating the model, get_input_act_qspec, get_output_act_qspec, get_weight_qspec, and get_bias_qspec can be used to get the QuantizationSpec from QuantizationConfig for a specific pattern.

Conclusion

With this tutorial, we introduce the new quantization path in PyTorch 2.0. Users can learn about how to define a BackendQuantizer with the QuantizationAnnotation API and integrate it into the quantization 2.0 flow. Examples of QuantizationSpec, SharedQuantizationSpec, FixedQParamsQuantizationSpec, and DerivedQuantizationSpec are given for specific annotation use case. This is a prerequisite to be able to quantize a model in PyTorch 2.0 Export Quantization flow. You can use XNNPACKQuantizer as an example to start implementing your own Quantizer. After that please follow this tutorial to actually quantize your model.