msvcrt --- 来自 MS VC++ 运行时的有用例程

---

These functions provide access to some useful capabilities on Windows platforms. Some higher-level modules use these functions to build the Windows implementations of their services. For example, the getpass module uses this in the implementation of the getpass() function.

关于这些函数的更多信息可以在平台 API 文档中找到。

该模块实现了控制台 I/O API 的普通和宽字符变体。普通的 API 只处理ASCII字符，国际化应用受限。应该尽可能地使用宽字符 API 。

在 3.3 版本发生变更: 此模块中过去会引发 IOError 的操作现在将引发 OSError。

文件操作

msvcrt.locking(fd, mode, nbytes)

Lock part of a file based on file descriptor fd from the C runtime. Raises OSError on failure. The locked region of the file extends from the current file position for nbytes bytes, and may continue beyond the end of the file. mode must be one of the LK_* constants listed below. Multiple regions in a file may be locked at the same time, but may not overlap. Adjacent regions are not merged; they must be unlocked individually.

引发一个 审计事件 msvcrt.locking，附带参数 fd, mode, nbytes。

msvcrt.LK_LOCK

msvcrt.LK_RLCK

Locks the specified bytes. If the bytes cannot be locked, the program immediately tries again after 1 second. If, after 10 attempts, the bytes cannot be locked, OSError is raised.

msvcrt.LK_NBLCK

msvcrt.LK_NBRLCK

锁定指定的字节数据。 如果字节数据无法被锁定，则会引发 OSError。

msvcrt.LK_UNLCK

解锁指定的字节数据，该对象必须在之前被锁定。

msvcrt.setmode(fd, flags)

设置文件描述符 fd 的行结束符转写模式。 要将其设为文本模式，则 flags 应当为 os.O_TEXT；设为二进制模式，则应当为 os.O_BINARY。

msvcrt.open_osfhandle(handle, flags)

Create a C runtime file descriptor from the file handle handle. The flags parameter should be a bitwise OR of os.O_APPEND, os.O_RDONLY, os.O_TEXT and os.O_NOINHERIT. The returned file descriptor may be used as a parameter to os.fdopen() to create a file object.

The file descriptor is inheritable by default. Pass os.O_NOINHERIT flag to make it non inheritable.

引发一个 审计事件 msvcrt.open_osfhandle，附带参数 handle, flags。

msvcrt.get_osfhandle(fd)

Return the file handle for the file descriptor fd. Raises OSError if fd is not recognized.

引发一个 审计事件 msvcrt.get_osfhandle，附带参数 fd。

控制台 I/O

msvcrt.kbhit()

Returns a nonzero value if a keypress is waiting to be read. Otherwise, return 0.

msvcrt.getch()

Read a keypress and return the resulting character as a byte string. Nothing is echoed to the console. This call will block if a keypress is not already available, but will not wait for Enter to be pressed. If the pressed key was a special function key, this will return '\000' or '\xe0'; the next call will return the keycode. The Control-C keypress cannot be read with this function.

msvcrt.getwch()

getch() 的宽字符版本，返回一个 Unicode 值。

msvcrt.getche()

Similar to getch(), but the keypress will be echoed if it represents a printable character.

msvcrt.getwche()

getche() 的宽字符版本，返回一个 Unicode 值。

msvcrt.putch(char)

将字符串 char 打印到终端，不使用缓冲区。

msvcrt.putwch(unicode_char)

putch() 的宽字符版本，接受一个 Unicode 值。

msvcrt.ungetch(char)

使得字节串 char 被“推回”终端缓冲区；它将是被 getch() 或 getche() 读取的下一个字符。

msvcrt.ungetwch(unicode_char)

ungetch() 的宽字符版本，接受一个 Unicode 值。

其他函数

msvcrt.heapmin()

强制 malloc() 堆清空自身并将未使用的块返回给操作系统。 失败时，这将引发 OSError。

msvcrt.set_error_mode(mode)

Changes the location where the C runtime writes an error message for an error that might end the program. mode must be one of the OUT_* constants listed below or REPORT_ERRMODE. Returns the old setting or -1 if an error occurs. Only available in debug build of Python.

msvcrt.OUT_TO_DEFAULT

Error sink is determined by the app's type. Only available in debug build of Python.

msvcrt.OUT_TO_STDERR

Error sink is a standard error. Only available in debug build of Python.

msvcrt.OUT_TO_MSGBOX

Error sink is a message box. Only available in debug build of Python.

msvcrt.REPORT_ERRMODE

Report the current error mode value. Only available in debug build of Python.

msvcrt.CrtSetReportMode(type, mode)

Specifies the destination or destinations for a specific report type generated by _CrtDbgReport() in the MS VC++ runtime. type must be one of the CRT_* constants listed below. mode must be one of the CRTDBG_* constants listed below. Only available in debug build of Python.

msvcrt.CrtSetReportFile(type, file)

After you use CrtSetReportMode() to specify CRTDBG_MODE_FILE, you can specify the file handle to receive the message text. type must be one of the CRT_* constants listed below. file shuld be the file handle your want specified. Only available in debug build of Python.

msvcrt.CRT_WARN

Warnings, messages, and information that doesn't need immediate attention.

msvcrt.CRT_ERROR

Errors, unrecoverable problems, and issues that require immediate attention.

msvcrt.CRT_ASSERT

Assertion failures.

msvcrt.CRTDBG_MODE_DEBUG

Writes the message to the debugger's output window.

msvcrt.CRTDBG_MODE_FILE

Writes the message to a user-supplied file handle. CrtSetReportFile() should be called to define the specific file or stream to use as the destination.

msvcrt.CRTDBG_MODE_WNDW

Creates a message box to display the message along with the Abort, Retry, and Ignore buttons.

msvcrt.CRTDBG_REPORT_MODE

Returns current mode for the specified type.

msvcrt.CRT_ASSEMBLY_VERSION

CRT 汇编版，来自 crtassem.h 头文件。

msvcrt.VC_ASSEMBLY_PUBLICKEYTOKEN

VC 汇编公钥凭据，来自 crtassem.h 头文件。

msvcrt.LIBRARIES_ASSEMBLY_NAME_PREFIX

库汇编名称前缀，来自 crtassem.h 头文件。