Three ways to wrap - getting started#

Wrapping Fortran or C functions to Python using F2PY consists of the following steps:

Creating the so-called signature file that contains descriptions of wrappers to Fortran or C functions, also called the signatures of the functions. For Fortran routines, F2PY can create an initial signature file by scanning Fortran source codes and tracking all relevant information needed to create wrapper functions.
- Optionally, F2PY-created signature files can be edited to optimize wrapper functions, which can make them “smarter” and more “Pythonic”.
F2PY reads a signature file and writes a Python C/API module containing Fortran/C/Python bindings.
F2PY compiles all sources and builds an extension module containing the wrappers.
- In building the extension modules, F2PY uses numpy_distutils which supports a number of Fortran 77/90/95 compilers, including Gnu, Intel, Sun Fortran, SGI MIPSpro, Absoft, NAG, Compaq etc. For different build systems, see F2PY and Build Systems.

Depending on the situation, these steps can be carried out in a single composite command or step-by-step; in which case some steps can be omitted or combined with others.

Below, we describe three typical approaches of using F2PY. These can be read in order of increasing effort, but also cater to different access levels depending on whether the Fortran code can be freely modified.

The following example Fortran 77 code will be used for illustration, save it as fib1.f:

C FILE: FIB1.F
      SUBROUTINE FIB(A,N)
C
C     CALCULATE FIRST N FIBONACCI NUMBERS
C
      INTEGER N
      REAL*8 A(N)
      DO I=1,N
         IF (I.EQ.1) THEN
            A(I) = 0.0D0
         ELSEIF (I.EQ.2) THEN
            A(I) = 1.0D0
         ELSE 
            A(I) = A(I-1) + A(I-2)
         ENDIF
      ENDDO
      END
C END FILE FIB1.F

Note

F2PY parses Fortran/C signatures to build wrapper functions to be used with Python. However, it is not a compiler, and does not check for additional errors in source code, nor does it implement the entire language standards. Some errors may pass silently (or as warnings) and need to be verified by the user.

The quick way#

The quickest way to wrap the Fortran subroutine FIB for use in Python is to run

python -m numpy.f2py -c fib1.f -m fib1

or, alternatively, if the f2py command-line tool is available,

f2py -c fib1.f -m fib1

Note

Because the f2py command might not be available in all system, notably on Windows, we will use the python -m numpy.f2py command throughout this guide.

This command compiles and wraps fib1.f (-c) to create the extension module fib1.so (-m) in the current directory. A list of command line options can be seen by executing python -m numpy.f2py. Now, in Python the Fortran subroutine FIB is accessible via fib1.fib:

>>> import numpy as np
>>> import fib1
>>> print(fib1.fib.__doc__)
fib(a,[n])

Wrapper for ``fib``.

Parameters
----------
a : input rank-1 array('d') with bounds (n)

Other Parameters
----------------
n : input int, optional
    Default: len(a)

>>> a = np.zeros(8, 'd')
>>> fib1.fib(a)
>>> print(a)
[  0.   1.   1.   2.   3.   5.   8.  13.]

Note

Note that F2PY recognized that the second argument n is the dimension of the first array argument a. Since by default all arguments are input-only arguments, F2PY concludes that n can be optional with the default value len(a).

One can use different values for optional n:

>>> a1 = np.zeros(8, 'd')
>>> fib1.fib(a1, 6)
>>> print(a1)
[ 0.  1.  1.  2.  3.  5.  0.  0.]

but an exception is raised when it is incompatible with the input array a:

>>> fib1.fib(a, 10)
Traceback (most recent call last):
  File "<stdin>", line 1, in <module>
fib.error: (len(a)>=n) failed for 1st keyword n: fib:n=10
>>>

F2PY implements basic compatibility checks between related arguments in order to avoid unexpected crashes.

When a NumPy array that is Fortran contiguous and has a dtype corresponding to a presumed Fortran type is used as an input array argument, then its C pointer is directly passed to Fortran.

Otherwise, F2PY makes a contiguous copy (with the proper dtype) of the input array and passes a C pointer of the copy to the Fortran subroutine. As a result, any possible changes to the (copy of) input array have no effect on the original argument, as demonstrated below:
```
>>> a = np.ones(8, 'i')
>>> fib1.fib(a)
>>> print(a)
[1 1 1 1 1 1 1 1]
```
Clearly, this is unexpected, as Fortran typically passes by reference. That the above example worked with dtype=float is considered accidental.

F2PY provides an intent(inplace) attribute that modifies the attributes of an input array so that any changes made by the Fortran routine will be reflected in the input argument. For example, if one specifies the intent(inplace) a directive (see Attributes for details), then the example above would read:
```
>>> a = np.ones(8, 'i')
>>> fib1.fib(a)
>>> print(a)
[  0.   1.   1.   2.   3.   5.   8.  13.]
```
However, the recommended way to have changes made by Fortran subroutine propagate to Python is to use the intent(out) attribute. That approach is more efficient and also cleaner.
The usage of fib1.fib in Python is very similar to using FIB in Fortran. However, using in situ output arguments in Python is poor style, as there are no safety mechanisms in Python to protect against wrong argument types. When using Fortran or C, compilers discover any type mismatches during the compilation process, but in Python the types must be checked at runtime. Consequently, using in situ output arguments in Python may lead to difficult to find bugs, not to mention the fact that the codes will be less readable when all required type checks are implemented.

Though the approach to wrapping Fortran routines for Python discussed so far is very straightforward, it has several drawbacks (see the comments above). The drawbacks are due to the fact that there is no way for F2PY to determine the actual intention of the arguments; that is, there is ambiguity in distinguishing between input and output arguments. Consequently, F2PY assumes that all arguments are input arguments by default.

There are ways (see below) to remove this ambiguity by “teaching” F2PY about the true intentions of function arguments, and F2PY is then able to generate more explicit, easier to use, and less error prone wrappers for Fortran functions.

The smart way#

If we want to have more control over how F2PY will treat the interface to our Fortran code, we can apply the wrapping steps one by one.

First, we create a signature file from fib1.f by running:

python -m numpy.f2py fib1.f -m fib2 -h fib1.pyf

The signature file is saved to fib1.pyf (see the -h flag) and its contents are shown below.

!    -*- f90 -*-
python module fib2 ! in 
    interface  ! in :fib2
        subroutine fib(a,n) ! in :fib2:fib1.f
            real*8 dimension(n) :: a
            integer optional,check(len(a)>=n),depend(a) :: n=len(a)
        end subroutine fib
    end interface 
end python module fib2

! This file was auto-generated with f2py (version:2.28.198-1366).
! See http://cens.ioc.ee/projects/f2py2e/

Next, we’ll teach F2PY that the argument n is an input argument (using the intent(in) attribute) and that the result, i.e., the contents of a after calling the Fortran function FIB, should be returned to Python (using the intent(out) attribute). In addition, an array a should be created dynamically using the size determined by the input argument n (using the depend(n) attribute to indicate this dependence relation).

The contents of a suitably modified version of fib1.pyf (saved as fib2.pyf) are as follows:
```
!    -*- f90 -*-
python module fib2 
    interface
        subroutine fib(a,n)
            real*8 dimension(n),intent(out),depend(n) :: a
            integer intent(in) :: n
        end subroutine fib
    end interface 
end python module fib2
```
Finally, we build the extension module with numpy.distutils by running:
```
python -m numpy.f2py -c fib2.pyf fib1.f
```

In Python:

>>> import fib2
>>> print(fib2.fib.__doc__)
a = fib(n)

Wrapper for ``fib``.

Parameters
----------
n : input int

Returns
-------
a : rank-1 array('d') with bounds (n)

>>> print(fib2.fib(8))
[  0.   1.   1.   2.   3.   5.   8.  13.]

Note

The signature of fib2.fib now more closely corresponds to the intention of the Fortran subroutine FIB: given the number n, fib2.fib returns the first n Fibonacci numbers as a NumPy array. The new Python signature fib2.fib also rules out the unexpected behaviour in fib1.fib.
Note that by default, using a single intent(out) also implies intent(hide). Arguments that have the intent(hide) attribute specified will not be listed in the argument list of a wrapper function.

For more details, see Signature file.

The quick and smart way#

The “smart way” of wrapping Fortran functions, as explained above, is suitable for wrapping (e.g. third party) Fortran codes for which modifications to their source codes are not desirable nor even possible.

However, if editing Fortran codes is acceptable, then the generation of an intermediate signature file can be skipped in most cases. F2PY specific attributes can be inserted directly into Fortran source codes using F2PY directives. A F2PY directive consists of special comment lines (starting with Cf2py or !f2py, for example) which are ignored by Fortran compilers but interpreted by F2PY as normal lines.

Consider a modified version of the previous Fortran code with F2PY directives, saved as fib3.f:

C FILE: FIB3.F
      SUBROUTINE FIB(A,N)
C
C     CALCULATE FIRST N FIBONACCI NUMBERS
C
      INTEGER N
      REAL*8 A(N)
Cf2py intent(in) n
Cf2py intent(out) a
Cf2py depend(n) a
      DO I=1,N
         IF (I.EQ.1) THEN
            A(I) = 0.0D0
         ELSEIF (I.EQ.2) THEN
            A(I) = 1.0D0
         ELSE 
            A(I) = A(I-1) + A(I-2)
         ENDIF
      ENDDO
      END
C END FILE FIB3.F

Building the extension module can be now carried out in one command:

python -m numpy.f2py -c -m fib3 fib3.f

Notice that the resulting wrapper to FIB is as “smart” (unambiguous) as in the previous case:

>>> import fib3
>>> print(fib3.fib.__doc__)
a = fib(n)

Wrapper for ``fib``.

Parameters
----------
n : input int

Returns
-------
a : rank-1 array('d') with bounds (n)

>>> print(fib3.fib(8))
[  0.   1.   1.   2.   3.   5.   8.  13.]

F2PY user guide and reference manual

F2PY user guide